BOSCH REXROTHEDH Compact Directional Valve (100L/min, for mobile machinery) has been newly launched and makes a fresh ap

Bosch Rexroth EDH Compact Directional Control Valve is designed for compactness + high flow rate of 100L/min + mechanical load sensitivity. The key points are as follows:
1. Applicable Industries
a. Small excavators, truck-mounted cranes, aerial work platforms, forklifts, loaders;
b. Agricultural tractors, harvesting and silage machines;
c. Municipal sanitation vehicles, cleaning / garbage trucks;
d. Forestry machinery, small mobile equipment for mining, special operation vehicles.
2. Replacement Considerations
a. Parameter Matching
Rated 100L/min, maximum 350bar; Verify system pressure, 12/24V voltage, LS load sensitive control, oil port thread specifications.
b. Installation Compatibility
Compact base plate installation, check installation holes and space; Replace with new sealing gaskets, evenly tighten bolts diagonally.
c. System Requirements
Pilot pressure 20–30bar; Maintain cleanliness of hydraulic oil, use cold-resistant seals for low temperatures.
d. Operating Tips
First, depressurize the system and mark the oil pipe interfaces; After installation, conduct a no-load test run first, then calibrate with load, and there should be no leakage or abnormal noise.
e. Prohibitions
Do not exceed flow rate or pressure; Do not directly install for non-LS systems; Prevent impurities from entering the valve to cause valve jamming.