| Parameter | Value |
|---|---|
| Rated Output Power (Constant Torque) | 0.75kW |
| Rated Output Current (Constant Torque) | 3.7A |
| Rated Output Power (Square Torque) | 0.75kW |
| Rated Output Current (Square Torque) | 3.7A |
| Maximum Frequency | Vector Control: 0~320Hz; V/F Control: 0~3200Hz |
| Carrier Frequency | 1kHz~16kHz (Automatically Adjustable) |
| Starting Torque | 0.5Hz/150% (No PG, constant torque application) |
| Speed Range | 1:100 (No PG) |
| Speed Stability | ±0.5% (No PG) |
| Overload Capacity | Constant Torque: 150% Rated Current 60s, 180% Rated Current 3s; Square Torque: 120% Rated Current 60s, 150% Rated Current 3s |
| Parameter | Value |
|---|---|
| External Dimensions (Width × Height × Depth) | 72mm × 142mm × 152mm |
| Installation Dimensions (A×B×Hole Diameter) | 132.7mm × 62.7mm, Ø5mm |
| Protection Rating | IP20 (Rack Mounting) |
| Cooling Method | Forced Air Cooling |
| Ambient Temperature | -20℃~+50℃ (Derating required above 50℃) |
| Humidity | ≤95% RH, Non-condensing |
| Parameter | Value |
|---|---|
| Control Functions | Built-in PID closed-loop control, 16-speed operation, S-curve acceleration/deceleration, DC braking, speed tracking restart, automatic voltage regulation (AVR), fast current limiting, etc. |
| Communication Functions | Standard RS485 interface, supports Modbus-RTU protocol, maximum baud rate 115200BPS |
| Input/Output | 6 digital input terminals (1 supporting 100kHz high-speed pulse), 2 analog input terminals, 1 digital output, 1 relay output, 1 analog output |
| Protection Functions | Overcurrent, overvoltage, undervoltage, overheating, overload, output phase loss, short circuit detection of motor upon power-on, etc. |