SIEMENS 6SL3210-1KE15-8UF2 SINAMICS G120C compact vector drive with built-in I/O and Safe Torque Off. 1.5kW, 3-phase 400V for energy-efficient motor control in pumps, fans and conveyor systems.

Three-phase 380V (-20%) to 480V (+10%)

5.6A

50Hz or 60Hz, within the allowable range of 47 to 63Hz

Low overload: 2.2kW
High overload: 1.5kW

3.0kVA

5.6A

0 - Input Voltage, with an error less than 5%

0~550Hz (V/F control), 0~240Hz (vector control)

V/F control mode, without PG sensorless vector control (SLVC) mode

Asynchronous motor, permanent magnet synchronous motor

1:50 (V/F), 1:100 (SLVC)

±0.5% (without PG vector control)

±0.3% (without PG vector control)

<100ms (without PG vector control)

±15%

1Hz 150% (without PG vector control)

150% rated current for 3 seconds, 110% rated current for 57 seconds (Low Overload mode)
200% rated current for 3 seconds, 150% rated current for 57 seconds (High Overload mode)

Keyboard number setting, analog quantity setting, pulse frequency setting, multi-stage speed running setting, simple PLC setting, PID setting, PROFINET/EtherNet/IP communication setting, etc. Realize the combination of settings and the switching of setting channels.

When the grid voltage changes, it can automatically maintain the output voltage constant.

Provide comprehensive fault protection functions: overcurrent, overvoltage, undervoltage, overheating, phase loss, overload, ground fault, motor stall, etc.

Realize the smooth and impact-free startup of a rotating motor

1 channel, AI1: 0(2) to 10V / 0(4) to 20mA

1 channel, AO1: 0(4) to 20mA

6-channel opto-isolated general input, PNP/NPN selectable, maximum frequency 1kHz

2-channel open collector output, maximum frequency 1kHz

None

Not equipped as standard, external optional

Wall-mounted installation only

Built-in brake unit as standard

No built-in EMC filter as standard; external C2/C3 filters available as options
Optional filters: IEC61800-3 C2, IEC61800-3 C3

-10 to 40 degrees Celsius. For use above 40 degrees Celsius, the performance will be reduced by 1% per degree up to 60°C.

Below 1000 meters, no derating required. Above 1000 meters, the rated current decreases by 1% for every 100 meters increase in altitude.

IP20 / UL Open Type

Meet the requirements of CE, UL, cUL certification, integrated STO (Safe Torque Off) SIL2/PLd

Forced air cooling

173mm * 73mm * 160mm

Approximately 1.3kg